Controlling a Syringe pump from a PC

 All of our syringe pumps can be controlled from a PC over USB (or RS232, for those pumps that have one installed)

They can be controlled by sending them  'Pump Chain' commands (plain ASCII) from any application that can send plain text out through a COM port (such as Labview, MATlab, Python or even a terminal emulator)

The list of available commands for the Pump 11 Elite / PhD Ultra:

The list of available commands for the Pump 33DDS is in the back of the manual

Examples of Python code code for sending the Pump Chain commands:

Python serial snippet

Examples of MATlab code code for sending the Pump Chain commands:

MATlab serial snippet

You may also find interesting:

Turning off NVRAM