Troubleshooting: Recalibrating Tilt Sensor
Recalibrating the tilt sensor
The screen on a PhD Ultra or Pump 11 Elite should autorotate whenever the pump is turned 90 degrees. If it does not, the tilt sensor may need to be recalibrated.
To resolve the issue:
In order to recalibrate the tilt sensor, you need to connect the pump to a windows PC (windows 10 will automatically load the driver) and use Pump Terminal to connect to the pump.
* place the pump flat on the bench and type:
tilt
* you may get an error message saying ‘bad tilt sensor’
*put the on its side and again type:
tilt
* one final time, put the pump flat on the bench and type:
tilt
That will recalibrate the tilt sensor
Special Notes:
You will need to install Pump terminal
You may also be interested in:
Configuring your Pump for PC Control
Comments
0 comments
Please sign in to leave a comment.